Yuanxin Electric YX2000, Руководство пользователя

Страница: 109 / 157

YX3000 Senseless Vector Type Inverter Manual
- 108 -
Table 6-6 Output terminal function selection
content function content Function
0 Inverter is running(RUN) 11 PLC running cycle finish
1 Freq. arrival signal(FAR) 12 Set counts arrival
2
Freq. level detected
signal(FDT1)
13 Specified counts arrival
3 reversed 14 Inverter ready for running
（
RDY
）
4 Overload pre-alarm signal
（
OL
）
15 Inverter fault
5 Under voltage locking
（
LU
）
16 Start freq. running time
6 External faults stopping
（
EXT
）
17 DC brake time when start
7 Output freq. upper limit
（
FH
）
18 DC brake time when stop
8 Output freq. lower limit
（
FL
）
19 Swing freq. upper/lower limit
9 Inverter in 0 speed running 20 Set running time arrival
10
Simple PLC stage running finish
21
Upper pressure alarm signal
22 Lower pressure alarm signal
The description of function listed in Table 6-6 as follow.
0
：
Inverter in running(RUN). In the running state, it outputs index signal.
1
：
Freq. arrival signal(FAR). Please refer to P4.12.
2
：
Freq. level detected signal(FDT1). Refer to P4.11~P4.12.
3
：
reserved
4
：
Overload pre-alarm signal(OL). As inverter output current exceeds P5.02 defined
overload detected level and the time is longer than P5.03 defined overload detected time. It
outputs index signal.
5
：
Under voltage locking(LU). In the running state, when DC bus bar voltage is lower than
limited level, the inverter will display ‘E-11’ and outputs index signal.
6
：
External fault stopping(EXT). When external fault alarm occurs (E-13), it outputs index
signal.