Yuanxin Electric YX2000, Руководство пользователя

Страница: 52 / 157

YX3000 Senseless Vector Type Inverter Manual
- 51 -
(1) This function code parameter is unmodifiable, such as actual detected state parameter,
record running parameter, etc.
(2) This function code parameter can not be revised in running state. It just can be revised in
stopping state.
(3) The parameter is under protection. When function code P3.01 unit’s place is 1 or 2, all
function code parameter can not be revised. This is parameter protection to avoid fault
operation. Set P3.01 unit’s place as 0 to make modification available.
C
、
JOG running operation
Following is an example. Suppose it is in panel control mode and in stopping state, JOG
running frequency is 5Hz.
Fig.4-9 JOG running operation
D
、
Password authentication operation
Suppose P0.00 password parameter has been set as “2345”. The authentication operation is
shown as Fig. 4-10. The bold figure represents the flashing bit.
5.00 50.00 0.01
Release
Stop
Stopping state
Displaying
output freq.
Output freq.
increasing by 5Hz
…
Key
operation
Displaying
setting freq.
Press
Hold
Output freq.
decreasing to 0Hz
0.01
JOG
JOG
JOG
50.00
LED
Display
0 .0.0.5
2.0.0.5
0.0.0.0 50.00
0.0.0. 5
2. 3 .0.5 2. 0 .0.5 2.3. 4 .5 -P 0 - 2.3. 0 .5
Enter password
authentication state
Unit’s place flashing,
increase to 5
Switch to the
highest bit
Increase to 2
Increase to 4
Increase to 3 Switch to the second
bit
Press confirmation key to enter programming
state after authentication
Switch to the
third bit
LED
Display
Key
operation
▲ ►► ▲
Stop, run state
parameters or fault
code display
►► ▲ ►► ▲
ENTER
DATA
MENU
ESC