Network Installation
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
80
AppleTalk
To Enable AppleTalk on the Device
1.
At your Workstation, open the web browser and enter the
IP address
of the device in the Address
bar. Press
[Enter]
.
2.
Click on the
[Properties]
tab.
3.
If prompted, enter the Administrator User ID and Password. The default is
[admin]
and
[1111]
.
4.
Click on the
[Login]
button.
5.
Click on the
[Connectivity]
link.
6.
Click on the
[Protocols]
link.
7.
Select
[AppleTalk]
in the directory tree.
8.
In the
General
area:
a.
For
Protocol
, check the
[Enabled]
checkbox
to enable the AppleTalk.
b.
Type a name for the device in
[Printer Name]
. The default name is based on the device’s
Ethernet MAC address.
c.
Enter details in the
[Zone Name]
filed. An AppleTalk zone is a logical group of nodes or
networks. Zones are assigned according to a logical scheme such as organizational
departments or physical locations.
Note:
The default local zone is identified as
“*”
. This should only be changed if you have defined
zones on your network.
•
Physical Connection
displays physical network connection. This will display
“Ethernet”
.
•
Printer Type
displays the current assigned printer type. This will display
“LaserWriter”
.
9.
Click on the
[Apply]
button to accept the changes or
[Undo]
to return the settings to their
previous values.
10. Click on the
[OK]
button when you see the message
“Properties have been successfully
modified”
.
Note:
The settings are not applied until you reboot the device.
11. Click on the
[Status]
tab, select
[Description & Alerts]
in the directory tree.
12. Click the
[Reboot Machine]
button and click
[OK]
to reboot the machine. The network controller
takes approximately 5 minutes to reboot and network connectivity will be unavailable during this
time.
Create an IPP Printer (Internet Printing Protocol)
Information Checklist
Before starting the procedure, please ensure the following items are available or have been performed:
•
Ensure TCP/IP and HTTP are configured on the device as per
Enable TCP/IP and HTTP at the
Device
on page 11, so that the web user interface (Internet Services) can be accessed.
•
Ensure that the DNS settings are configured.
Содержание ColorQube 9201
