Authentication
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
126
Authentication Configuration for NDS (Novell)
Information Checklist
Before starting the procedure, please ensure the following item has been performed.
•
Ensure the NetWare protocol is enabled on your device by printing a Configuration Report.
At the Device:
a.
Press the
<Machine Status>
button.
b.
Touch the
[Machine Information]
tab.
c.
Touch
[Information Pages]
.
d.
Touch
[Configuration Report]
.
e.
Touch
[Print]
, then touch
[Close]
.
The Configuration Report will print. Verify the NetWare settings configured under Network Setup.
NetWare should read Enabled.
For instructions on how to enable NetWare, refer to
NetWare
on page 95 of this guide.
At your Workstation:
1.
Open the web browser and enter the
IP address
of the device in the Address bar, and press
[Enter]
.
2.
Click the
[Properties]
tab.
3.
If prompted, enter the Administrator User ID and Password. The default is
[admin]
and
[1111]
.
4.
Click on the
[Login]
button.
5.
Click on the
[Security]
link.
6.
Click on the
[Access Rights]
link.
7.
Select
[Setup]
in the directory tree.
8.
The
Authentication Configuration
page is displayed, in the
Current Configuration
area click on
the
[Edit Methods]
button for
Authentication
.
9.
In the
Where is the Information Located?
area select
[Remotely on the Network]
from the
drop-down menu for
Device User Interface Authentication
, and click on the
[Save]
button to
return to the
Authentication Configuration
page.
Note:
Make sure that the NetWare protocol has been enabled per the instructions contained in
this guide in the Network Installation section. For NDS you will need to supply the NDS tree and
context.
10. In the
Current Configuration
area, click on the
[Configure]
button for
Authentication Server
.
11. In the
Authentication Server
page:
a.
Select
[NDS (Novell)]
from the
Authentication Type
drop-down menu.
b.
In the
Default Tree/Context (Required)
area, enter details in the
[NDS Tree]
and
[NDS
Context]
fields.
c.
In the
Alternate Tree/Context (Optional)
, enter details for up to 2
[NDS Tree]
and
[NDS
Context]
field, if required.
d.
Click on the
[Save]
button to save the settings and return to the
Authentication
Configuration
page.
Содержание ColorQube 9201
