Workflow Scanning
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
184
9.
In the
Server Information
area:
a.
For
Protocol
, select from the drop-down menu, the communication protocol for the
Validation Server.
b.
Select the method you want to use to specify the Validation Server, select either
[IPv4
Address]
,
[IPv6 Address]
or
[Host Name]
.
c.
Enter the IP Address or Hostname of the Validation Server and the port number.
Note:
The default port number is
80
if you select
HTTP
for
Protocol
or
443
if you selected
HTTPS
for
Protocol
.
d.
In the
[Path]
field, enter the path on the server.
Note:
The format for a directory path for FTP is
/directory/directory
, while the format for a
directory path for SMB is
\directory\directory
.
e.
Specify the time in seconds after which the server will time out in the
[Response Timeout]
field. The range is from 5 to 100. The default is 8.
f.
Click on the
[Apply]
button to save settings and return to the
Validation Server
screen.
10. To
Delete
a Validation Server from the list:
a.
Highlight the Validation Server and click on the
[Delete]
button.
b.
Click on the
[OK]
button when you see the confirmation message
‘Are you sure you want to
delete the selected validation server?’
.
Scanning Web Service
Use this page to examine the status of services required for Scanning Web Services.
The following services must be enabled and/or configured for Scanning Web Services to be available:
•
HTTP (SSL)
•
Scan Template Management
•
Scan Extension
At your Workstation:
1.
Open the web browser and enter the
IP address
or location of the device in the Address bar, and
press
[Enter]
.
2.
Click the
[Properties]
tab.
3.
If prompted, enter the Administrator User ID and Password. The default is
[admin]
and
[1111]
.
4.
Click on the
[Login]
button.
5.
Click on the
[Services]
link.
6.
Click on the
[Workflow Scanning]
link.
7.
Select
[Scanning Web Services]
in the directory tree.
8.
In the
Setup (Required)
area, the following services will display the status of configuration:
•
HTTP (SSL)
- displays the status of the HTTP (SSL) server. Click on the
[Settings]
button to
review or change the HTTP Protocol Settings. For information on HTTP protocol settings, refer
to the
Enable Secure HTTP (SSL)
on page 154.
•
Scan Template Management
- displays the status of the Scan Template Management
service. Click on the
[Settings]
button to enable or disable this HTTP Web Service.
Содержание ColorQube 9201
