background image

Workflow Scanning

Xerox ColorQube™ 9201/9202/9203
System Administrator Guide

188

Check the 

[Record User Input to Job Log]

 checkbox, to record all values entered by the 

user for this data field.

Note:

Validate Data Before Scanning

 options may also be available if there are validation servers 

configured for this device.

3.

Click on the 

[Apply]

 button to return to the Default Template page.

Workflow Scanning

The 

Workflow Scanning

 section displays the image type settings.

To changes the Workflow Scanning settings, click on the 

[Edit]

 button, this will display the 

Workflow 

Scanning

 page.

1.

In the 

Workflow Scanning

 area:

a.

For 

[Output Color]

, select one of the following:

Auto Detect

Color

Black (Black and White)

Grayscale

Note:

If you select Black as the Output Color, the JPEG option is not available on the Filing Options 

page. You can only select Color as the Output Color if you have a color scanner attached to your 
printer.

b.

For 

[2-Sided Scanning]

, select one of the following:

1-Sided

 - the scan service will only scan one side of each page of the input document. 

2- Sided - 

the scan service will scan both sides of each page of the input document. 

2-Sided

Rotate Side 2 - 

the scan service will scan both sides of each page of the input 

document and shall apply a 180 degrees rotation to the second side image such that the 
orientation of all input images are the same.

c.

The 

Original Type

 feature provides a convenient way to optimize the quality of your scanned 

output images based on the content in your original documents. Each selection adjusts the 
printer settings to compensate for the predominant attributes of the content that is being 
scanned. Select one of the following:

Photo & Text

 - this is best for documents that contain a mix of photographic images and 

text. 

Photo - 

this is best for documents that contain photographic images and little or no text. 

Text

 - this is best for documents that contain mostly text. 

Map

 - this is best for black and white or color line drawings and other printed materials 

of this type. 

Newspaper/Magazine - 

this is best for scanning materials produced with an offset 

printer.

d.

For 

[How Original was Produced]

, select one of the following media type used of the original 

document:

Printed Original

Photocopied Original

Содержание ColorQube 9201

















































































































































































































































































































































Отзывы: