Authentication
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
135
Enable 802.1X
At the Device
:
1.
Press the
<Log In/Out>
button to enter the Tools pathway.
2.
Enter the Administrator’s User Name
[admin]
, touch
[Next]
, enter Password
[1111]
, touch
[Enter]
.
3.
Press the
<Machine Status>
button, then the
[Tools]
tab.
4.
Touch
[Network Settings]
.
5.
Touch
[Advanced Settings]
.
6.
At the Warning screen, touch
[Continue]
.
7.
Touch
[802.1X]
.
8.
Touch
[Enable]
.
9.
Select the Authentication Method (EAP type) used on your network by touching the
[Authentication Method]
.
10. Touch
[Username]
.
11. Enter the user name required by your authentication switch and server.
12. Touch
[Save]
.
13. Touch
[Close]
. The network controller will now reset taking the device offline for several minutes.
14. When the device comes back online, if the Tools screen is still displayed, with a message indicating
that you are still logged in as Administrator, press the
<Log In/Out>
button, then touch
[Logout]
to exit the Tools pathway.
Configure 802.1X with Internet Services
In addition to enabling 802.1X at the device, 802.1X can be configured with Internet Services (the
embedded HTTP server running on the device). Make sure that the HTTP and TCP/IP protocols are
properly configured for your network before attempting to use your web browser to communicate with
the device’s HTTP server.
Note:
Some ports in an 802.1X environment may not be open, preventing Internet Services
screens from being displayed. If this is the case, enable and configure 802.1X first at the device as
previously stated in this section, then use Internet Services to modify settings as required and
stated below.
Note:
802.1X Port Based Network Access Control is used to ensure that devices that are connected
to the network have the proper authorization. The 802.1X configuration is used to authenticate
the multifunction device rather than an individual user. After the device has been authenticated, it
will be accessible to users on the network.
1.
At your Workstation, open the web browser and enter the
IP address
of the device in the Address
bar, and press
[Enter]
.
2.
Click the
[Properties]
tab.
3.
If prompted, enter the Administrator User ID and Password. The default is
[admin]
and
[1111]
.
4.
Click on the
[Login]
button.
5.
Click on the
[Security]
link.
6.
Select
[802.1X]
in the directory tree.
a.
Check the
[Enable 802.1X]
checkbox.
Содержание ColorQube 9201
