Network Installation
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
104
4.
Click
[Enter]
to accept default of non-default printer.
5.
Click
[Enter]
to start process of adding queue.
6.
Type
[q]
to quit the rlpconf program.
CUPS
The Common UNIX Printing System (CUPS) was created by Easy Software Products in 1998 as a
modern replacement for the Berkeley Line Printer Daemon (LPD) and A T and T Line Printer (LP) system
designed in the 1970s for printing text to line printers.
Currently available for downloading from a number of sources on the Internet, such as www.cups.org,
CUPS is offered in both source code and binary distributions.
Information Checklist
Before starting the procedure, please ensure the following items are available or have been performed:
•
Ensure TCP/IP and HTTP are configured on the device as per
Enable TCP/IP and HTTP at the
Device
on page 11, so that the web user interface (Internet Services) can be accessed.
•
Ensure that the DNS settings are configured.
Enable Port 9100 as additional support for HTTP (IPP) printing
1.
At your Workstation, open the web browser and enter the
IP address
of the machine in the
Address bar, and press
[Enter]
.
2.
Click the
[Properties]
tab.
3.
If prompted, enter the Administrator User ID and Password. The default is
[admin]
and
[1111]
.
4.
Click on the
[Login]
button.
5.
Click on the
[Connectivity]
link.
6.
Click on the
[Protocols]
link.
7.
Select
[Raw TCP/IP Printing]
in the directory tree.
8.
In the
General
area:
a.
For
Protocol,
check the
[Enabled]
checkbox to enable Raw TCP/IP Printing.
b.
Physical Connection
displays the physical network connection, this will always display
“Ethernet”
.
9.
Upto three ports may be enabled and configured, in the
Port Information
area:
a.
For
Port 1
Leave the
[TCP Port Number]
set to 9100. If two additional ports are available,
click
[Default All]
to see if they set to 9101 and 9102 respectively (emulating HP JetDirect EX
Plus 3).
b.
Leave the
[Bidirectional]
checkboxes and
[Maximum Connections per Port]
settings at their
default values.
c.
Set the
[End of Job Timeout]
to the number of seconds to wait before processing a job
without an End Of Job indicator. The range is from 1 to 65535, and the default is 300.
d.
Leave the
[PDL Switching]
Enabled checkbox at its default value.
Note:
Do not check the
[Enabled]
checkbox for
PDL Switching
, when Windows clients print using
port 9100. this prevents each print job from generating a banner page.
Содержание ColorQube 9201
