Security
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
158
3.
To add or edit an Action in the
IP Protocol Group
area:
a.
In the
IP Actions
area, click either on the
[Add New Action]
button to add a new Action or
highlight an Action and click on the
[Edit]
button to edit details of an Action.
Note:
If you change the name of an Action that is being used in Security policy, then the updated
action name will also change in the security policy entry.
4.
In the
IP Action Details
area:
a.
Enter a name for this IP Action in the
[Action Name]
field.
b.
Enter description for this IP Action in the
[Description]
filed.
5.
In the
Keying Method
area:
a.
Select a Keying Method, this will specify the type of authentication used in an IP Sec policy.
Select one of the following:
•
Manual Keying
: This method is used if client devices are not configured for or do not support
Internet Key Exchange (IKE).
•
Internet Key Exchange (IKE)
: This is a keying protocol that works on top of IPsec. IKE offers
a number of benefits, including: automatic negotiation and authentication; anti-replay
services; certification authority (CA) support; and the ability to change encryption keys during
an IPsec session. Generally, IKE is used as part of virtual private networking.
•
X.509 Certificate (Local Certificate) - This is a public key certificate.
•
Trusted Root Certificate.
•
Pre-shared Key Passphrase - The use of pre-shared key authentication is not
recommended because it is a relatively weak authentication method.
b.
If you select
[Internet Key Exchange (IKE)]
, enter the pre-shared key passphrase in the
[Pre-
shared Key Passphrase]
.
Note:
Only one Action may be created when selecting Internet Key Exchange (IKE) Keying
Method.
6.
Click on the
[Next]
button to display the
Step 2 of 2
screen.
If you Selected Manual Keying as the Keying Method:
1.
In the
Mode Selections
area, select one of the
[IPsec Mode]
from the drop-down menu:
•
Transport Mode:
This is the default Mode for IP Sec, this only encrypts the IP payload.
•
Tunnel Mode
: This mode encrypts the IP header and the payload. It provides protection on
an entire IP packet by treating it as an AH or ESP payload.
When this mode is selected, you have the option of specifying a host IP address.
2.
In the
Security Selections
area select preferred option and enter the required information.
3.
Click on the
[Save]
button to return to the IP Sec - Action page.
If you Selected Internet Key Exchange (IKE) as the Keying Method:
IKE Phase 1 authenticates the IPSec peers and sets up a secure channel between the peers to enable
IKE exchanges.
Содержание ColorQube 9201
