Network Installation
Xerox ColorQube™ 9201/9202/9203
System Administrator Guide
101
•
Select
[Remote Printer is on a BSD System]
and click
[OK]
to complete form.
9.
Click
[Yes]
at the Configure HP UX Printers Subpanel screen. This screen may be obscured by Add
Remote Printer/Plotter form.
10. Select
[File: Exit]
.
11. Select
[File: Exit Sam]
.
12. Type
[exit]
to exit super user mode.
13. Test the queue created. Type the command
[lp -d queuename /etc/hosts]
.
tty Method
Follow the steps below to use the HP System Administrator Manager (SAM) GUI (Graphical User
Interface).
Note:
Refer to the HP-UX documentation for additional information on using the System
Administrator Manager (SAM).
1.
Open a command window on the desktop. From the command prompt (#), enter the information
below. Remember that UNIX commands are case-sensitive.
2.
Type
[su]
to become super user.
3.
Type
[sh]
to run the Bourne shell.
4.
Type
[lpshut]
to stop the print service.
5.
Create the print queue by typing (on the same command line):
[lpadmin -pqueuename -
v/dev/null -mrmodel -ocmrcmodel -osmrsmodel -ob3 -orc -ormhostname -orplp]
Where queuename is the name of the queue being created and hostname is the machine
hostname from the /etc/hosts file.
6.
Type
[lpsched]
to start the print service.
7.
Type
[enable queuename]
to enable the queue to print to the machine.
8.
Type
[accept queuename]
to the queue accepting jobs from the HP-UX workstation.
9.
Type
[exit]
to exit the Bourne shell and then
[exit]
to exit super user mode.
10. Test the queue created. Type the command
[lp -d queuename /etc/hosts]
.
11. Verify that the job is printed at the device.
Solaris 2.x
Information Checklist
Before starting the procedure, please ensure the following items are available or have been performed:
•
Ensure that the correct IP Address is being used for the machine. To verify this, print a
Configuration Report from the machine.
At the Device:
a.
Press the
<Machine Status>
button on the device.
b.
Touch the
[Machine Information]
tab.
c.
Touch
[Information Pages]
.
d.
Touch
[Configuration Report]
.
e.
Touch
[Print]
, then touch
[Close]
.
Содержание ColorQube 9201
