XCMG XCT80, Руководство по эксплуатации

Страница: 177 / 250

XCT80 Truck Crane Operation Manual
10-1 Crane operation
Chapter 10
Chapter 10 Crane operation
10-1 Crane operation preparations
10-1-1 Check before crane runing
10-1-2 Crane operation conditions
check
Two conditions of the safe use of the
crane: good state equipments and well trained
operators.
1. Detailed reading the engine speci
fi
cation
relating to its start and stop section.
2. Check the hydraulic oil level of crane
and ensure that the hydraulic oil quantity
reaches a prescribed value.
3. Check any components state, con
fi
rm no
abnormal phenomenon and strictly forbidden
for operating under abnormal conditions.
4. After starting the engine, it runs with
slow speed and idling to make the engine full
preheating.
5. Before switch on the power take-off
device, one must confirm that any operation
h a n d l e s a n d s w i t c h e s a r e l o c a t e d i n t h e
"medium" or "off" position.
6. When the operation without load, ensure
that any control handles and switches have no
abnormal phenomenon, and strictly forbidden
for operating under abnormal conditions.
7. Before operating the torque limiter,
it should be pre-checked (see "torque limiter
manual").
8. Check all safety devices (such as alarm
indicator lamp) with or without abnormal
phenomenon.
The crane operators must obtain or trying
to investigate the following conditions before
driving the crane to the construction site:
1. Operation type;
2. Construction site( distance);
3. Passing height and road width along the
way;
4. Wire case overhead the operation ;
5 . O p er atin g co n d itio n s limit d u e to
surrounding buildings;
6. Weight and shape size of the lifting
heavy;
7. Lifting and falling height;
8. Foundation bearing capacity, etc.
After obtaining these details, the crane
operator can determine to mount the necessary
lifting device and master the lifting working
conditions: such as the lifting hook; the auxiliary
boom; the support pad; the operating route
selection; approval of driving the crane.
If the driver does not master the necessary
lifting working conditions, it is difficult to finish
the task successfully. Therefore, before the
operation, the operator should do well all kinds of
preparation work to prevent accidents.
9. Before the crane operation, the power
switch should be turned off in operating room of
lower crane portion.
Courtesy of CraneMarket.com