Fig. 15:
ToolKit-SC: Configure external LEDs
Items
Parameters
Defaults
Description
Ext. LED enable
enabled/disabled
disabled
Notes
All 16 external outputs are enabled/disabled together.
»enabled«: The following related settings will be taken into
account.
Communication failure
action
Not used
Warning
Shutdown
Warning
Alarm type to be released if wire break is detected.
Mute button TX enable
enabled/disabled
enabled
Allows the external LED signalling module to mute the horn
signal.
(Adjust to logic)
Output (N.O.)
Output (N.C.)
Output
(N.O.)
Select according to logic of the connected signal (normally
open or normally connected).
(Map Programmable
Output)
00 to 299
00 Not
Used
╚═▷ “4.3.3 Programmable Outputs”
for details.
46
easYgen-400
B37884A
4 Configuration
4.2.4.1.4 Configure external LEDs 1
Released
