Icons
Keys
Description
2) Settings menu: Up cursor and increase value in
Close GCB in MAN mode
Down/Decrease
1) Screen scroll
2) Settings menu: Down cursor and decrease value
3) Open GCB in MAN mode
4) Lamp test: Press button for 5 sec
Right
Set/Confirm
1) Mute horn
2) Settings menu: Hold button for 5 sec
3) Settings meu: select digit position
Alarm
Status
In MANual mode:
Pressing
and
(START) simultaneously will force the generator to crank.
Successful start will not be judged according to crank disconnect conditions, the operator
needs to crank the starter motor manually; Once the engine has fired, the operator must
relase the button. Only then the start output will be deactivated, safety on delay will
start.
WARNING!
Users can change passwords. Please make note of the new password after changing it. If
you forget the password, please contact Woodward services and send all device
information on the “ABOUT” page of the controller for legitimation.
4.1.2
Front Panel Control
General Notes
Buttons below the screen/display have specific functions that are described in
The configuration via front panel is limited to the current code level and restricted due to
the editing/input possibilities of different buttons. Full access to all configuration options
is only available when using the configuration (software) tool.
Navigation buttons allow for selection of a dedicated menu screen and the increase/
decrease, next/previous, and enter commands.
31
easYgen-400
B37884A
4 Configuration
4.1.2 Front Panel Control
Released
