Rev.
Date
Editor Changes
Corrections/Repairs
• ID 837 Breaker logic "constant" de-energizes with breaker alarm
•
• ID 931 Corrected Volvo ECU 50/60 Hz selection
•
• ID 1000 Reference values for rated "active power" and "reactive
•
power"
B
2019-05
PW
NEW Software Revision 2.0.0.1 and ToolKit-SC version 1.5.0.4
Corrections/Repairs
• Fixed the following in HMI software:
•
◦ fixed the version name to 4 digits;
◦
◦ possibility to close GCB when engine not running;
◦
◦ kvar spelling;
◦
◦ impossibility to mute the horn with easYlite-200;
◦
◦ HMI user defined sensor curves displaying messy codes in
◦
other languages
◦ after gen closed, if changed breaker close delay by Toolkit-
◦
sc, 6550 countdown error occurred in HMI;
◦ when change to OEM plant theme and Terminal users
◦
theme, press close/open button in manual mode, error
occurred in breaker page;
◦ Horn/Alarm Acknowledge / Alarm reset function
◦
◦ "Traditional Chinese" implemented
◦
◦ changed name easYgen400/easYgen1400 to easYgen-400/
◦
easYgen-1400 in controller information page;
◦ status LED not turning on if the "Conventional Engine" was
◦
selected, easYgen and genset in STOP condition, START
button pressed;
◦ maintenance counter resetting
◦
◦ Polish translation errors
◦
◦ modified configuration of auto test mode, including number
◦
of input ports, LED display order, and level sensor changed
from flexible sensor to resistor type sensor;
◦ J1939 standard and setpoint idle
◦
◦ Volvo EMS2 50/60Hz rated speed selection
◦
◦ overload monitoring not using the "return" value;
◦
◦ Volvo EMS2 rated frequency selection and rated speed
◦
modification;
◦ mains breaker warning in MAN mode;
◦
◦ operation mode changing from MAN with closed GCB to
◦
MCB;
◦ breaker status in MAN mode;
◦
◦ removed all ECU types with Modbus;
◦
◦ removed “Baud rate and Modbus slave ID” parameters;
◦
10
easYgen-400
B37884A
1 General Information
1.1.1 Revision History
Released
