Woodward easYgen-400, Техническое руководство

Страница: 43 / 91

Items Parameters Defaults Description
If a type (01 or higher)
with curve is selected: Curve can be
loaded ... -/- Notes
For temperature curve management and customization.
... and/or edited (curve)
Wire break alarm Warn
Shutdown
None
Warn Alarm type to be released if a wire break is detected
High limit action Immediate Stop
Cooling Down
Immediate
Stop Reaction from the device if the high temperature alarm is
triggered.
Immediate Stop: The GCB opens and the engine stops
immediately
Cooling down: The GCB opens and the engine stops after
the configured cooldown time.
High limit shutdown 80 to 140 ºC 98 ºC (208
°F) Release the alarm when the sensor value is identical to or
higher than this value.
High limit warning 80 to 140 ºC 98 ºC (208
°F) Release the alarm when the sensor value is identical to or
higher than this value.
Engine heater control enabled/disabled disabled Notes
»enabled«: The following related settings will be taken into
account
On 0 to 300 ºC 50 ºC (122
°F) The engine heater control is switched on if the actual
temperature is lower than the configured threshold.
Off 0 to 300 ºC 55 ºC (131
°F) The engine heater control is switched off if the actual
temperature is higher than the configured threshold.
Delay 0 to 3600 min 60 min Maximum activation time from the engine heater control.
With a value of 0 the max. runtime is disabled.
Items Parameters Defaults Description
Pressure
Type 00 to 14 08 SGX See chapter ╚═▷ “4.3.1 Programmable Sensors”
If a type (01 or higher)
with curve is selected: Curve can be
loaded ... -/- Notes
For pressure curve management and customization.
... and/or edited (curve)
Wire break alarm Warn
Shutdown
None
Warn Alarm type to be released if wire break is detected
Low limit action Immediate Stop
Cooling Down
Immediate
Stop Reaction from the device if the high temperature alarm is
triggered.
Immediate Stop: The GCB opens and the engine stops
immediately
43 easYgen-400 B37884A
4 Configuration
4.2.4.1.3 Configure Analog Inputs
Released