manualshive.com logo in svg

Wacker Neuson ET12 02, Руководство оператора

Поделиться
Скачать
Wacker Neuson ET12 02 Скачать руководство пользователя страница 98

4-38

BA ET18, 20, 24 en*  1.5 * et18_20_24i400.fm

 

4 Putting into operation

Putting into operation for the first time and running-in period

Before putting the machine into operation for the first time, check it 
visually for exterior damage due to transport, and check whether the 
equipment supplied with the machine is complete.
• Check the fluid levels according to chapter “Maintenance”.

Each machine is correctly adjusted and checked before it is delivered.

Handle the machine carefully during its first 50 operating hours.
• Do not load a cold engine.
• Warm up the machine at low engine speed and little load, do not warm 

it up at a standstill.

• Do not change engine speed abruptly.
• Avoid using the machine under heavy loads or at high speeds.
• Avoid abrupt acceleration, braking and changing travel direction.
• Do not run the engine at high speed for extended periods.
• Strictly observe the maintenance plans and perform (or have 

performed) the specified maintenance 

– see chapter “7.2 Maintenance 

overview” on page 7-2

.

Machine travel on public roads

Information

The machine is not certified for travel on public roads.

Содержание ET12 02































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды