Wacker Neuson ET12 02 Скачать руководство пользователя страница 195

Страница: 195 / 286

BA ET18, 20, 24 en* 1.5 * et18_20_24w700.fm

7-17

Maintenance

Removing/installing the cabin/canopy

DANGER

Danger of accidents when performing machine travel without cabin/
canopy!

Causes serious injury or death.

►

Performing machine travel with a removed cabin/canopy is only
allowed for performing machine travel over very short distances.

►

Fastening the seat belt is prohibited.

►

Do not perform any work without a cabin/canopy.

►

Obtain the approval of the appropriate national authority.

►

Machine travel is only allowed on level ground.

►

Avoid tipping movements of the machine under all circumstances.

►

Machine travel in areas involving a risk of falling objects is prohibited.

NOTICE

Check for damage as you raise the machine.

►

Slowly raise the cabin.

►

Wait until the machine does not swing any more.

►

The lifting gear must not chafe or touch glass surfaces.

1. Stop and park the machine. Stop the engine. See “Preparing

lubrication”.

2. Open the engine cover.
3. Remove shackle

in the engine compartment.

4. Remove the rear roof lights (option).
5. Install shackle

and tighten the screw to 45 Nm (33.2 ft.lbs).

Fig. 242Engine compartment shackle

Fig. 243Cabin shackle

Содержание ET12 02































































































































































































































































































Результаты поиска

Содержание ET12 02

Отзывы:

Бренды по названию

Популярные бренды

Wacker Neuson ET12 02, Руководство оператора

Результаты поиска

Содержание ET12 02

Отзывы:

Бренды по названию

Популярные бренды