manualshive.com logo in svg

Wacker Neuson ET12 02, Руководство оператора

Поделиться
Скачать
Wacker Neuson ET12 02 Скачать руководство пользователя страница 84

4-24

BA ET18, 20, 24 en*  1.5 * et18_20_24i400.fm

 

4 Putting into operation

Shatter protection (option)

DANGER

Danger of piercing/penetration by fragments from the front!

Causes serious injury or death.

►

A shatter protection must be installed on a canopy version if an 
attachment (for example a hammer) causes fragments to fly around. 
This shatter protection takes over the function of a front window. If the 
machine is equipped with a cabin, the front window must be closed 
during hammer operation.

►

Note restricted work area (see Fig. 96/97)

►

Machine operation is prohibited without a shatter protection.

CAUTION

Accident hazard in conditions of restricted visibility due to rain, 
snowfall, dust, etc.

Can cause injury.

►

Stop machine operation immediately.

NOTICE

Only a Wacker Neuson service center may install the shatter protection for 
the first time.

NOTICE

Do not use brushes, steel wool or other abrasive cleaners for cleaning the 
polycarbonate disk. Do not wipe dust in a dry state.

Information

The shatter protection (canopy option) protects the user against fragments 
from the front.

►

The machine owner must ensure that the hazard situation is evaluated 
and that the national regulations are observed.

►

The machine owner must ensure that only work is performed that does 
not require any higher protection.

►

Accidents cannot be fully avoided despite equipping a machine with 
protective structures.

The shatter protection cannot be combined with a protective Front Guard 
structure.

Содержание ET12 02































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды