manualshive.com logo in svg

Wacker Neuson ET12 02, Руководство оператора

Поделиться
Скачать
Wacker Neuson ET12 02 Скачать руководство пользователя страница 212

7-34

BA ET18, 20, 24 en*  1.5 * et18_20_24w700.fm

 

7 Maintenance

Adding coolant

WARNING

Burn hazard. The engine coolant is under pressure at high 
temperature!

Causes serious injury or death.

►

Wear protective gloves and eye protection.

►

Stop the engine and allow it to cool down at least 10 minutes.

►

Carefully open the radiator cap.

1. Stop and park the machine. Stop the engine. See “Preparing 

lubrication”.

2. Open the engine cover.
3. Release overpressure in the radiator. Carefully unscrew filler cap 

B

 

and release the pressure.

4. Open filler cap 

B

.

5. Add coolant up to the 

FULL

 mark.

6. Close filler cap 

B

.

7. Start the engine and let it warm up for about 5 – 10 minutes.
8. Stop the engine.
9. Remove the starting key and carry it with you.
10.Let the engine cool down.
11.Check the coolant level again.
12.If necessary, add coolant and repeat the procedure until the coolant 

level remains constant.

13.Close and lock the engine cover.

NOTICE

Do not add a different coolant to the one in the reservoir.

►

Use only the coolant prescribed by Wacker Neuson 

– see chapter “7.3 

Fluids and lubricants” on page 7-10

.

Cleaning the radiator

CAUTION

Burn hazard during maintenance on the radiator!

Can cause injury.

►

Stop the engine and allow it to cool down at least 10 minutes.

►

Wear protective gloves and eye protection.

Fig. 261Check the coolant level

B

FULL

Содержание ET12 02































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды