Wacker Neuson ET12 02 Скачать руководство пользователя страница 153

Страница: 153 / 286

BA ET18, 20, 24 en* 1.5 * et18_20_24b510.fm

5-49

Operation

5.11 Work operation

Inadmissible work procedures

Working with the swivel force

• Do not use the swivel force of the upper carriage to tear down walls or

to create level surfaces.

• Never ram the attachment into the ground when swiveling the upper

carriage.

➥

This can damage the machine or the attachment.

Working with the drive force

• Never ram the attachment into the ground to dig during machine travel.

➥

This can damage the machine or the attachment.

Retracting the attachment

• When retracting the attachment, ensure that it does not touch the

stabilizer blade.

Working with the falling force by lowering the attachment

• Do not use the falling force of the attachment as a hoe, hammer or pile-

driver.

➥

Working this way can greatly reduce the machine’s service life.

Fig. 200Working with the swivel force

Fig. 201Working with the drive force

Fig. 202Retracting the attachment

Fig. 203Working with the falling force

Содержание ET12 02































































































































































































































































































Результаты поиска

Содержание ET12 02

Отзывы:

Бренды по названию

Популярные бренды

Wacker Neuson ET12 02, Руководство оператора

Результаты поиска

Содержание ET12 02

Отзывы:

Бренды по названию

Популярные бренды