manualshive.com logo in svg

Wacker Neuson ET12 02, Руководство оператора

Поделиться
Скачать
Wacker Neuson ET12 02 Скачать руководство пользователя страница 160

5-56

BA ET18, 20, 24 en*  1.5 * et18_20_24b510.fm

 

5 Operation

5.13 Options

Safe load indicator (option)

The safe load indicator gives the driver optical and acoustic warnings 
when the values of the stability table are exceeded.

DANGER

Danger of tipping over due to failure to pay attention to the safe load 
indicator!

A tipping machine can cause serious injury or death.

►

Reduce reach or the lift load until both the acoustic signal and the 
indicator light in the display element go out.

►

Pay attention to the stability table.

WARNING

Accident hazard due to switched-off or malfunctioning safe load 
indicator!

A tipping machine can cause serious injury or death.

►

Switch on the safe load indicator during lifting gear applications.

Functional check of the pressure switch of the safe load indicator

Always perform a functional check of the safe load indicator before 
performing lifting gear applications.

1. Start the machine.
2. Perform machine travel on open terrain.
3. Secure the danger zone.
4. Stop the machine.
5. Switch on the safe load indicator.
6. Raise the boom as far as it will go and hold the control lever in this 

position.

➥

The acoustic signal must sound and the indicator light must 
illuminate.

➥

The machine may be used for lifting gear applications.

7. The acoustic signal does not sound, or the indicator light does not 

illuminate.

➥

The machine may 

not 

be used for lifting gear applications.

➥

Contact a Wacker Neuson service center and have the malfunction 
rectified.

Perform a functional check of the control lever base.

– see chapter “ Functional check of control lever base” on page 4-17

Содержание ET12 02































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды