manualshive.com logo in svg

Wacker Neuson ET12 02, Руководство оператора

Поделиться
Скачать
Wacker Neuson ET12 02 Скачать руководство пользователя страница 82

4-22

BA ET18, 20, 24 en*  1.5 * et18_20_24i400.fm

 

4 Putting into operation

Protective Front Guard structure with integrated FOPS/category I 
respectively (option)

DANGER

Danger of piercing/penetration by objects from the front!

Causes serious injury or death.

►

A protective Front Guard structure with integrated FOPS must be 
installed in areas with danger from the front (for example pipes, tree 
trunks, etc.) and of falling objects.

►

Machine operation is prohibited without a protective Front Guard 
structure with an integrated FOPS.

Information

The protective FOPS structure corresponds to category I according to ISO 
3449:1998

►

The machine owner must ensure that the hazard situation is evaluated 
and that the national regulations are observed.

►

The machine owner must ensure that only work is performed that does 
not require any higher protection.

►

Accidents cannot be fully avoided despite equipping a machine with 
protective structures.

Assembly

1. Stop and park the machine. Stop the engine. See “Preparing 

lubrication”.

2. Remove all mirrors (option).
3. A minimum 2 persons are required for installing/removing.
4. Install the lock nuts and screws on either side.

5. Mounting point for protective structure: 

A 

(upper)

/C 

(lower).

Fig. 91Front Guard with integrated FOPS 

(symbolic representation)

Fig. 92Upper mounting point

A

E

Содержание ET12 02































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды