Wacker Neuson ET12 02 Скачать руководство пользователя страница 34

Страница: 34 / 286

2-18

BA ET18, 20, 24 en* 1.5 * Sicherheit_12072013.fm

2 Safety

Battery

• Batteries contain caustic substances (for example sulfuric acid). When

handling the battery observe the specific safety instructions and
regulations relevant to accident prevention.

• A volatile oxyhydrogen mixture forms in batteries during normal

operation and especially during charging. Always wear gloves and eye
protection when working with batteries.

• Do not perform battery maintenance near open flames.
• Perform battery maintenance only in well-ventilated areas (for example

due to vapors harmful to health, explosion hazard).

• Starting the machine with battery jumper cables is dangerous if

performed improperly. Observe the safety instructions regarding the
battery.

Safety instructions regarding internal combustion engines

• Internal combustion engines present special hazards during operation

and fueling.

• Failure to follow the warnings and safety instructions can cause

serious injury or death.

• Keep the area around the exhaust system free of flammable materials.
• Check the engine and fuel system for leaks (for example for loose fuel

lines). Do start or let the engine run in case of leaks.

• Breathing the exhaust fumes causes death very quickly.
• Engine exhaust contains gases you cannot see or smell (for example

carbon monoxide and dioxide).
- Never operate the machine in enclosed premises or areas (for

example in pits), if there is no suitable ventilation (for example
exhaust-gas filters, suction systems).

• Do not operate the machine in potentially explosive areas.
• Do not touch the engine, exhaust system and cooling system as long

as the engine is still running or has not cooled down yet.

• Do not remove the radiator cap when the engine is running or hot.
• The coolant is hot, under pressure and can cause serious burns.

Bleeding the fuel system and refueling

• Do not bleed the fuel system or refuel near open flames.
• Bleed the fuel system and refuel only in well-ventilated areas (for

example due to vapors harmful to health, explosion hazard).

• Wipe away fuel spills immediately (for example due to fire hazard,

slipping hazard).

• Firmly close the fuel tank cap, replace a malfunctioning fuel tank cap.

Содержание ET12 02































































































































































































































































































Результаты поиска

Содержание ET12 02

Отзывы:

Бренды по названию

Популярные бренды

Wacker Neuson ET12 02, Руководство оператора

Результаты поиска

Содержание ET12 02

Отзывы:

Бренды по названию

Популярные бренды