manualshive.com logo in svg

Wacker Neuson ET12 02, Руководство оператора

Поделиться
Скачать
Wacker Neuson ET12 02 Скачать руководство пользователя страница 101

BA ET18, 20, 24 en*  1.5 * et18_20_24i400.fm 

4-41

Putting into operation

4

Jump-starting the engine

WARNING

Explosion hazard in case of incorrect handling of battery!

Can cause serious injury or death.

►

Never jump start the engine if the battery is frozen. Dispose of a frozen 
battery.

►

In order to avoid electrical short-circuit or overvoltage, the battery 
jumper cable connected on the positive terminals of the batteries must 
never be brought into contact with electrically conductive vehicle parts.

►

The vehicles must not touch each other during the starting aid.

►

The voltage of the auxiliary power supply must be 12 V; higher voltage 
will damage the electrical system of both vehicles.

►

Use only authorized battery jumper cables which conform to the safety 
requirements and which are in perfect condition.

►

Route the battery jumper cables so they cannot catch on rotating 
components in the engine compartment.

►

Do not lean over the battery.

►

Keep ignition sources away from the battery.

1. Drive the jump-starting vehicle close enough to the machine so that the 

battery jumper cables can reach to connect both batteries.

2. Let the engine of the jump-starting vehicle run.
3. First connect one end of the red battery jumper cable (

+

) to the positive 

terminal of the empty battery, then connect the other end to the 
positive terminal of the starting battery.

4. Connect one end of the black battery jumper cable (

−

) to the negative 

terminal of the starting battery.

5. Connect the other end of the black battery jumper cable (

−

) to a solid 

metal component fimly screwed on the engine block or onto the engine 
block itself.

➥

Do not connect it to the negative terminal of the empty battery, as 
otherwise explosive gas emerging from the battery can ignite if 
sparks are formed.

6. Start the engine of the machine with the empty battery.
Once the engine has started:
• With the engine running, disconnect both battery jumper cables in the 

reverse order.

Information

In order to avoid sparking, first disconnect the battery jumper cable on the 
negative terminal, then the battery jumper cable on the positive terminal.

Fig. 109Overview

Starting

battery

Empty battery

Содержание ET12 02































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды