Wacker Neuson ET12 02 Скачать руководство пользователя страница 142

Страница: 142 / 286

5-38

BA ET18, 20, 24 en* 1.5 * et18_20_24b510.fm

5 Operation

Hydraulic Easy Lock quickhitch (option)

• Attend specific training before putting into operation. Training must be

given by authorized technical personnel and must be understood by
the operator.

• For safety reasons, the quickhitch must be operated with two control

elements. This avoids opening the quickhitch unintentionally during
work operation.

• There must be no dirt on the claws before hitching.
• For more information, see

Easy Lock/Powertilt with Easy Lock

Operator’s Manual.

• Store the Operator’s Manual of the hydraulic quickhitch together with

the Operator’s Manual of the machine.

WARNING

Accident hazard when picking up attachments!

If an attachment is not locked correctly, it can come off and cause serious
injury or death.

►

Do not allow anyone to stay in the danger zone.

►

Do not use damaged attachments.

►

Check pin

must be fully retracted. Otherwise repeat the lock cycle

until check pin

is retracted.

►

Ensure safe locking with a rapid succession of stick and bucket
movements as close as possible to the ground.

►

Operate the machine only with a safely locked attachment.

WARNING

Danger of crushing when attachments are removed!

If an attachment is not locked correctly, it can tip over and cause serious
injury or death.

►

Do not allow anyone to stay in the danger zone.

►

Lower the attachment to level and firm ground ensuring stability.

Содержание ET12 02































































































































































































































































































Результаты поиска

Содержание ET12 02

Отзывы:

Бренды по названию

Популярные бренды

Wacker Neuson ET12 02, Руководство оператора

Результаты поиска

Содержание ET12 02

Отзывы:

Бренды по названию

Популярные бренды