manualshive.com logo in svg

Wacker Neuson ET12 02, Руководство оператора

Поделиться
Скачать
Wacker Neuson ET12 02 Скачать руководство пользователя страница 107

BA ET18, 20, 24 en*  1.5 * et18_20_24b500.fm 

5-3

Operation

5

5.4

Travel operation

Drive position

• Position the machine as shown.
• Position the boom at the center and raise it about 20 to 30 cm (8 – 12 

in) off the ground.

Information

During machine travel, raise the stabilizer blade sufficiently high off the 
ground to avoid ground contact on rough terrain.

Starting machine travel and stopping

WARNING

Accident hazard due to incorrectly rotated upper carriage!

If rotated incorrectly, the upper carriage blocks the visibility of the travel path.

►

Before starting machine travel on a construction site, align the upper 
carriage so that the operator has an unrestricted view of the travel path.

Starting machine travel

After starting the engine:
• Indicator lights 

29

 (charge indicator light) and 

30

 (engine oil pressure) 

go out.

• Slowly actuate the drive lever.

➥

Machine travel starts.

Information

Machine travel cannot be started unless the control lever bases are folded 
down.

Stopping

The drive levers automatically return to their initial positions as soon as 
they are released. This creates sufficient hydraulic braking effect.
During downhill machine travel, the automatic hydraulic brake valves 
prevent the machine from moving faster than the permissible travel speed.

Information

Use the drive levers to reduce the travel speed as required.

Fig. 117Machine travel position

20 to 30 cm

(8 – 12 in)

Содержание ET12 02































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды