manualshive.com logo in svg

Wacker Neuson ET12 02, Руководство оператора

Поделиться
Скачать
Wacker Neuson ET12 02 Скачать руководство пользователя страница 131

BA ET18, 20, 24 en*  1.5 * et18_20_24b510.fm 

5-27

Operation

5

Hammer operation

Important information regarding hammer operation

Use the canopy version only with a shatter protection during hammer 
operation.
If the machine is equipped with a cabin (option), the front window must be 
closed.

– see chapter “ Shatter protection (option)” on page 4-24

WARNING

Danger of piercing/penetration by objects from the front!

Work involving risk of piercing/penetrating by objects from the front can 
cause accidents with serious injury or death.

►

During operation, all persons must stay clear of the job site of the 
machine.

►

Do not position the vehicle under the workplace during demolition, 
since debris could fall onto the machine.

►

Observe the mandatory limits of the work area.

►

Do not hammer horizontally or upward.

►

Only hammer with attached shatter protection or closed front 
windshield.

WARNING

Accident hazard due to tipping over of machine!

A tipping machine can cause serious injury or death.

►

During operation, all persons must stay clear of the job site of the 
machine.

►

Do not perform any demolition work under the machine. This could 
cause the machine to tip over.

►

The machine can lose its balance and tip over if a hammer or other 
heavy attachment is used.

►

Never turn, lower or set down the attachment abruptly.

►

Do not extend or retract the boom abruptly.

►

Do not use the impact force of the attachment to perform demolition 
work. Broken or falling pieces can cause serious injury.

►

Use a hammer only at machine standstill.

Information

In combination with Powertilt, only use the smallest possible released 
hydraulic breaker.

Содержание ET12 02































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды