Wacker Neuson ET12 02 Скачать руководство пользователя страница 31

Страница: 31 / 286

BA ET18, 20, 24 en* 1.5 * Sicherheit_12072013.fm

2-15

Safety

Preparatory measures

• Attach a warning label to the control elements (for example “Machine

being serviced, do not start”).

• Before performing assembly work on the machine, support the areas to

be serviced and use suitable lifting and supporting equipment for the
replacement of parts over 9 kg (20 lbs.).

• Perform maintenance only if:

- the machine is positioned on firm and level ground
- the machine is secured to prevent it from rolling away (for example

with the parking brake, wheel chocks), and if all attachments/the
work equipment is lowered to the ground

- the engine is stopped
- the starting key has been removed
- the pressure in the operating hydraulics has been released

• If maintenance has to be performed under a raised machine/

attachment, support the machine/attachment (for example with a lift
platform, trestles) ensuring safety and stability.

• Hydraulic cylinders or jacks alone do not sufficiently secure a raised

machine/attachment.

Measures for performing maintenance

• Perform only the maintenance described in this Operator’s Manual.
• All work that is not described in this Operator’s Manual must be

performed by qualified and authorized technical personnel.

• Follow the maintenance plan – see “Maintenance plan”.
• Always use specially designed or otherwise safety-oriented ladders

and working platforms to perform overhead maintenance. Do not use
machine parts or attachments as a climbing aid.

• Do not use attachments/work equipment as a lift platform for persons.
• Remove all dirt, snow and ice from climbing aids (for example

handholds, footholds, handrails).

• Disconnect the negative terminal of the battery before working on the

electrical system.

Содержание ET12 02































































































































































































































































































Результаты поиска

Содержание ET12 02

Отзывы:

Бренды по названию

Популярные бренды

Wacker Neuson ET12 02, Руководство оператора

Результаты поиска

Содержание ET12 02

Отзывы:

Бренды по названию

Популярные бренды