manualshive.com logo in svg

Wacker Neuson ET12 02, Руководство оператора

Поделиться
Скачать
Wacker Neuson ET12 02 Скачать руководство пользователя страница 204

7-26

BA ET18, 20, 24 en*  1.5 * et18_20_24w700.fm

 

7 Maintenance

7.7

Fuel system

Important information regarding the fuel system

Information

Fill up the tank with the correct fuel type at the end of each working day to 
prevent the formation of condensation water in the fuel tank. Do not fill the 
tank completey so the fuel can expand.

Information

Do not run the fuel tank completely dry. Otherwise, air is drawn into the 
fuel system. This requires bleeding the fuel system.

Diesel fuel specification

NOTICE

Use only the diesel fuels indicated.

►

If other fuels are used, warranty rights shall not apply in case of diesel 
engine damage.

►

Do not use diesel fuel with additives.

– see “Fluids and lubricants” on page 7-10

Refueling

WARNING

Explosion and fire hazard when handling fuel!

Can cause serious burns or death.

►

Never perform work on the fuel system near open flames or sparks.

►

Do not smoke.

►

Keep the maintenance area clean.

►

Do not refuel in closed rooms.

Содержание ET12 02































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды