Wacker Neuson ET12 02 Скачать руководство пользователя страница 214

Страница: 214 / 286

7-36

BA ET18, 20, 24 en* 1.5 * et18_20_24w710.fm

7 Maintenance

7.10 Air filter

Important information regarding the air filter

• Store filters in their original packaging and in a dry place.
• Check air filter attachments, air intake hoses and the air filter element

for damage, and immediately repair or replace them if necessary.

• Check the screws at the induction manifold and the clamps for

tightness.

Dirt indicator

NOTICE

In order to avoid damage to the diesel engine, bear in mind the following:

►

Replace the air filter elements as soon as the red mark on the dirt
indicator is displayed.

►

Do not clean air filter elements, replace them.

►

Do not use any damaged air filter elements.

Replace the air filter elements as soon as the red mark

is on the dirt

indicator

is displayed.

• After replacing the air filter elements, press button

to reset the red

mark

Fig. 263Dirt indicator

Maintenance

Содержание ET12 02































































































































































































































































































Результаты поиска

Содержание ET12 02

Отзывы:

Бренды по названию

Популярные бренды

Wacker Neuson ET12 02, Руководство оператора

Результаты поиска

Содержание ET12 02

Отзывы:

Бренды по названию

Популярные бренды