manualshive.com logo in svg

Wacker Neuson ET12 02, Руководство оператора

Поделиться
Скачать
Wacker Neuson ET12 02 Скачать руководство пользователя страница 158

5-54

BA ET18, 20, 24 en*  1.5 * et18_20_24b510.fm

 

5 Operation

Working on slopes

WARNING

Tipping hazard of machine on slopes!

A tipping machine can cause serious injury or death.

►

Secure slopes before beginning to work. Pay attention to ground 
conditions, machine weight, etc.

►

Stabilize the machine with the stabilizer blade during excavation work.

NOTICE

Lifting arm cylinders can be damaged from improper operation.

►

The piston rod must not touch the stabilizer blade.

Hints for digging

When planning and performing digging work, Wacker Neuson 
recommends that you observe the following points:
• Exits from pits must be outside the digging line and as level as 

possible.

• Dig by removing adjacent strips if possible.
• Ensure that you can drive forward when driving out of the digging area 

with a fully loaded bucket.

• Perform transport trips downhill with loaded bucket in reverse 

operation.

Freeing the machine

If the machine gets stuck in the ground:
• Tilt out the bucket until the blade is vertical above the ground.
• Lower the boom all the way.
• Slowly tilt out the bucket.

➥

The machine is pushed backward.

• Reverse slowly.
• Repeat this procedure until the tracks reach firm ground.
• Reverse the machine away.

Fig. 216Working on slopes

Содержание ET12 02































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды