31
sympHony
™
Meter User Guide
Chapter IX
ISE Technique
ISE Setup Menu
Note:
Refer to the Meter Setup section for the Setup Menu Table, which contains
a complete list of meter setup options and descriptions.
1. In the measurement mode, press
.
2. Press
/
to scroll through the setup menu until
is displayed on the
top line.
3. Press
to accept the selection and move the arrow icon to the middle line.
4. Press
/
to scroll through
for the ISE measurement resolution,
for the ISE measurement units,
for the ISE calibration range and
for the non-linear blank correction feature.
5. Press
to accept the selection and move the arrow icon to the bottom line.
6. To scroll through a list of options on the bottom line, press
/
until the
desired option is displayed. To enter a numeric value for an option on the bottom
line, press
/
to adjust each digit and
to move to the next digit.
7. Press
to accept the selection and move the arrow icon to the top line.
8. Repeat steps 3 through 7 to change another ISE setting or press
to return
to the measurement mode.
Содержание sympHony
Страница 12: ...VWR sympHony Meter User Guide Exhibit 5 2...
Страница 69: ...254503 001 Rev B...
