4
sympHony
™
Meter User Guide
Measurement Unit Icons
In the measurement mode, the arrow icon on the left side of the display screen
indicates the active line. Press
to move the arrow icon to the desired line and
press
/
to scroll through the measurement unit icons associated with
the selected line. The measurement unit icons for the sympHony multi-parameter
meter are shown below. The single and dual parameter meters will have fewer
measurement lines and icons, depending on the meter capabilities.
A
pH, mV, relative mV or ISE
B
Conductivity, TDS, salinity or
resistivity
C
Dissolved oxygen as % saturation,
dissolved oxygen as concentration,
or barometric pressure
The units of measurement, which are displayed on the right side of the screen, will
flash until the reading is stable.
Note:
If a measurement line is not needed, press
to move the arrow
icon to the measurement line that is not needed and press
/
until the
measurement line is completely blank.
Display
Содержание sympHony
Страница 12: ...VWR sympHony Meter User Guide Exhibit 5 2...
Страница 69: ...254503 001 Rev B...
