Volvo SDLG LG956L Скачать руководство пользователя страница 75

Страница: 75 / 130

Operation & Maintenance Manual

──

LG956L Wheel Loader

Working Device Control Handle

Refer to

1.1 General View of Controls and

Gauges Figure 3-1 and 3-2

in this chapter.

This handle controls the bucket and lift arm. There are

four gears to control the lift, neutral, lower and float of

the lift arm pro-and post, and there are three gears to

control the forward tilt, neutral and rear tilt of the

bucket from left to right.

Lift Arm Control

Push the working device handle forward and backward to utilize the lower, floating, neutral and

lifting of the lift arm.

Lift is used for lifting.

Neutral is used for maintaining the bucket in the desired position.

Lower is used for lowering.

Float is used for moving freely under applied force.

Notice:

Never put the lift arm down when it is in the floating position.

Bucket Control

Move the control handle from left to right to control the front tilt, neutral and rear tilt of the

bucket.

Rear Tilt is used for drawing in the bucket

Neutral is used for keeping the bucket in the desired position.

Forward Tilt is used for dumping.

Lifting limit location function:

When place the control handle in the lifting position, the

electromagnetic force from lifting limit location locked magnet coil of pilot valve can lock the

control level in the lifting position; When the lift arm lifts to the highest position, the lifting limit

proximity switch (fixed on the lift arm) controls the locked magnet coil of pilot valve to power

off, so the control handle turn to neutral position to realize the lifting limit to prevent the working

device from injury by hydraulic impact.

Set level automatically function:

When dumping in the highest position, move the control

handle left to the rear tilt position and the control handle is locked. During drawing the bucket,

the control handle returns to the neutral position and place it in the lowering position when in the

set level automatically position. Then the working device is placed on the ground and the bucket

is in the bucketing position in order to realize the set level automatically function and increase the

Содержание SDLG LG956L



































































































































Результаты поиска

Содержание SDLG LG956L

Отзывы:

Похожие инструкции для SDLG LG956L

Бренды по названию

Популярные бренды

Volvo SDLG LG956L, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание SDLG LG956L

Отзывы:

Похожие инструкции для SDLG LG956L

Бренды по названию

Популярные бренды