Volvo SDLG LG956L, Руководство по эксплуатации и техническому обслуживанию

Страница: 25 / 130

Operation & Maintenance Manual ── LG956L Wheel Loader
20
z Clean thoroughly the flammable materials such as sawdust, leaves and paper which collect in the
engine and brake clip, and clean the flammable oil, lubricating oil and other substances on the
machine.
z
While operating, pay attention when the outlet of the muffler is close to flammable materials such
as withered grass and old papers.
z
When parking the loader, carefully select the environment; especially select the places where
there are no flammable materials near the parts with a high temperature such as the muffler.
z
Check whether there is the leakage of fuel, lubricating oil, or hydraulic oil. If so, repair or replace
the broken items. Clean the repaired items before
use.
z If there is explosive air generated near the storage
battery, be sure there is no flame or fire nearby.
Repair, maintain and use the storage battery as
referenced in users manual.
z Do not use flame or fire (match or lighter) to check
in a dark place.
z The fire extinguisher should be ready for use at all
times and the user must be knowledgeable about its use and function. Check and maintain it as
referenced in users manual.
z
Never operate machine near flame or fire.
z Do not short circuit.
3.5 Precautions When Operating at High Temperature
z Just after turning off the engine, the coolant, engine oil and hydraulic oil are at high temperature
and still under high pressure. The attempt to remove the cap, drain the oil or water, or replace
filters may lead to serious burns. Always wait for the temperature to go down, and follow the
specified procedures when performing these
operations.
z Stop the engine, wait for the water to become cool,
and then loosen the cap slowly to relieve the inner
pressure before removing the cap of radiator.