Volvo SDLG LG956L Скачать руководство пользователя страница 74

Страница: 74 / 130

Operation & Maintenance Manual

──

LG956L Wheel Loader

Press

position to turn it on.

Press

OFF

position to turn it off.

Turn it off during driving.

Fan Switch:

Press the bottom side for low air speed;

Press the top side for high air speed;

Press the middle of the button, and the fan will stop.

Horn Switch:

Press the button in the middle of the steering wheel, and the horn will sound.

Power Switch

The switch locates on the left side of rear frame. The power of

the whole vehicle is shut off when the switch turns to the ‘ ’

position; The power of the whole vehicle is turn on when the

switch turns to the ‘ ’ position. Please shut the power switch if

park the vehicle for a long time.

1.2.3 Steering Wheel

The steering wheel and steering unit are connected. Turning the steering wheel clockwise, the

machine turns right; turning the steering wheel anticlockwise, the machine turns left.

The features are listed below:

The rotation angles of the steering wheel and the machine are not equal. If the steering wheel is

continuously turned; the machine rotation angle will increase until at the needed position.

The faster the steering wheel turns, the faster the machine turns.

The steering wheel will not automatically come back after turning, the turning angle of the

machine will be kept. After finishing turning the machine, turn the steering wheel in the reverse

direction to keep the machine moving in a straight direction.

1.2.4 Control Levers and Pedals

Shifting Control Lever

This lever controls the direction and traveling speed of the
machine.
Place the speed shifting control lever in the N position which is
the neutral gear; Put the control lever forward to the 1 position
can obtain the forward gear

Ⅰ

, and the loader drives forward

slowly; when turn it to 2 position can obtain the forward gear ,

Ⅱ

and the loader drives forward fast. Put the control lever to the R
position can obtain the reverse gear, and the loader drives backward.

Содержание SDLG LG956L



































































































































Результаты поиска

Содержание SDLG LG956L

Отзывы:

Похожие инструкции для SDLG LG956L

Бренды по названию

Популярные бренды

Volvo SDLG LG956L, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание SDLG LG956L

Отзывы:

Похожие инструкции для SDLG LG956L

Бренды по названию

Популярные бренды