Volvo SDLG LG956L Скачать руководство пользователя страница 51

Страница: 51 / 130

Operation & Maintenance Manual

──

LG956L Wheel Loader

more. The explosion and the particles can lead to severe injury, even death, so please keep the

pressure of the tire at the normal level. Inflation pressure should not surpass the standing value.

The inflation pressure is shown in

CHAPTER II - 8 TECHNICAL PERFORMANCE

& PARAMETERS

Driving at high speeds increases the temperature, and therefore, the pressure.

Never

try to reduce

the pressure, but reduce the speed to cool the tire. Continuous high speed driving can lead to over

heating and tire explosion.

Stand at the back of the tire, and stand as far as possible away from the tire when adjusting the

pressure of the tire.

Check the tire and rim every day for cracks or bubbles.

Never

operate in a low pressure

condition.

Check that the bolt and nut of the rim are in place. Check whether the torque of the nut satisfies

the suggested value of the factory.

Never

stand in the front or the rear of the rolling direction of the tire. Check the tire from the side.

If disassembling one tire lock the other tires.

Take care when welding near a tire, which can cause explosion of the tire.

Only a trained person with a professional license can repair a tire and rim using specific tools and

following the proper steps.

Use the uniform tire with the same standard and same flower

pattern for replacement.

8.19.2 Storage of Tires

It is the basic rule that tires should be stored in a warehouse. No one

can enter without permission. Put a fence around and hang a “

Enter

” sign if the tires are stored outside the warehouse.

Store the tires in a dry and clean place. Water can oxidize a tire, and

dirt and oil can erode a tire. No light, heat insulation or ventilation

are needed for storage. Cover the tires with a canvas, plastic or other anti-dust cloth. The wrong

storage method can greatly reduce the quality and life of tires.

Stand the tire on level ground and use a wedge to lock it to prevent it falling down. The quality

may be reduced if the tire is laid on its side. The tire should be rotated (90

) once per month at

Содержание SDLG LG956L



































































































































Результаты поиска

Содержание SDLG LG956L

Отзывы:

Похожие инструкции для SDLG LG956L

Бренды по названию

Популярные бренды

Volvo SDLG LG956L, Руководство по эксплуатации и техническому обслуживанию

Результаты поиска

Содержание SDLG LG956L

Отзывы:

Похожие инструкции для SDLG LG956L

Бренды по названию

Популярные бренды