Volvo SDLG LG956L, Руководство по эксплуатации и техническому обслуживанию

Страница: 71 / 130

Operation & Maintenance Manual ── LG956L Wheel Loader
66
1.2.2 Switch
z Starting Switch
This switch is used for starting or shutting down the electric system
and the engine. Refer to
1.1 Control Systems and Gauges
Figure3-1 and 3-2
in this chapter.
HEAT Position
This position is used for the engine pre-heating position of cold-start
system. The domestic basic type is not mounted with pre-heat system,
the user can select to install.
OFF Position
Insert or remove the key in this position. Turn the key to this position to cut off the electric
power.
ON Position
This position is used to turn on the electric system. Keep the key in this position when the engine
is running.
START Position
This is the engine-start position. Keep the key at this position during starting. After the engine has
started, immediately pull out the key, or it will return to ON position automatically.
z Radio and CD Player Control Panel (if assembled)
This switch is at the right side of the ceiling cab, and for the details please refers to Radio and
CD Player Assemble & Operation Manual. If the radio is not assembled, the connecting line of
radio is reserved, please assemble it according to the electric principle diagram by authorized person
of vehicle or construction machinery electric.
z
Turning Switch (if assembled)
Push this switch forward, and the left turning lamp lights. Push this switch backward, and the
right turning lamp lights. Refer to
1.1 Control System and the Gauge Figure 3-1
in this
chapter.
z Switch Group (if assembled)
Refer to
1.1 Control System and the Gauge
Figure 3-2
in this chapter. The switch controls
lighting, high and low beam and steering light.
‹ Lighting
When the starting switch is in the ON position, the high beam of front headlight is lightened if the