VITALI FLARES, Техническое руководство, Страница: 68 / 88

T 5
64
Replacing the bowl
To access the interior of the water unit, proceed as
described in Chap. “
Accessing the internal parts of
the water unit ”.
1) Disconnect the bowl from the drain and its various
utility inlets.
2) Unscrew the three M4 screws " A ".
Proceed in reverse order to re-assemble.
A
Assembling the table instrument cords
1) Open the upper table housing as described in the
chapter " Accessing the internal parts of the
instrument table ".
2) Remove the grey cap from the upper instrument table
guard and insert the cable holder " A " provided.
3) Insert the cord as illustrated.
4) Extend the cord to the correct length, and attach the
end inside the instrument table using the clamp
provided. Take care not to throttle passage of the
internal hoses.
5) Connect to utilities as shown in the various diagrams
enclosed with this manual.