VITALI FLARES, Техническое руководство, Страница: 17 / 88

13
T 5
Assembling the instrument table arm
Proceed as follows to assemble the instrument table arm:
1) Insert all of the cables and hoses “ E ” from the instrument table arm through the hole “ D ”
2) Secure the tray table to the dental unit bracket with the four M8 screws “ A ” provided, level the arm with the three
M10 dowel pins “ B ” located on side " C ".
3) Level using surface " F " as a reference allowing for possible bending and tighten the four Allen M8 screws " A ".
4) Tighten the three M10 dowels " B " to avoid losing the leveling adjustment.
5) After installation, apply protection guard " M " on the bracket " C " by means of the two M5 screws.