VITALI FLARES, Техническое руководство, Страница: 15 / 88

11
T 5
Mounting the dental unit bracket on the chair
Proceed as follows:
1) Insert the tube bundle “ A ” (bundle of electrical cables clamped to the ribbed grey suction hose id. 25 and the
sheath containing the air and water intake hoses) through the hole “ D ” in the bracket “ C ”.
2) Insert the hose " B " (transparent Armovin water drainage hose diam. 20x27).
3) Attach the bracket in area " E " through the holes " F " using the three M10 Allen screws.
4) Level using surface " G " as a reference by means of the four M10 dowels " L " and tighten the three M10 Allen
screws.
5) After fastening the bracket, cut the plastic clamps on the bundle of hoses " A ".
6) Fit the closing guard " H " on the seat guard " I " and fasten by means of the countersunk screws M6 supplied.
7) Cover the M6 screws using the two white covers supplied.