VITALI FLARES, Техническое руководство, Страница: 66 / 88

T 5
62
B
D
A
C
☞
NOTE: only in RE
versions
Adjusting the vertical chair movement mechanical memory
Remove the lower parallelogram housing as described in the chapter " Accessing the internal parts ", par.
" Removing the lower parallelogram housing ". Use an Allen wrench to loosen the M4 dowel " A " and adjust the
position of the activator " B ", positioning it along the rod " C ". Tighten the dowel " A " and move the chair up and down
to make sure the microswitch " D " is activated.
When the final adjustment is achieved, close the housings by proceeding in reverse order.
Adjusting the backrest movement mechanical memory
C
A
B D
Remove the upholstery as described in the
chapter "
Accessing the internal parts ", par.
" Removing the seat upholstery ".
Use an Allen wrench to loosen the M4 dowel
"
A " and adjust the position of the activator " B ",
positioning it along the rod " C ". Tighten the
dowel " A " and move the backrest to make sure
the microswitch " D " is activated.
When the final adjustment is achieved, replace
the upholstery by proceeding in reverse order.