VITALI FLARES, Техническое руководство, Страница: 55 / 88

51
T 5
1 • Timed tumbler filling with LED, followed by timed bowl flushing (press again to cancel the function).
2 • Manual bowl flushing with LED (ON/OFF switch).
3 • Operating lamp ON/OFF switch (make sure the switch on the lamp is set to " ").
4 • Reverse micromotor rotation direction (the LED remains lit until normal rotation is restored).
5 • Emergency position with LED (press the key to achieve the Trendelenburg position, compensated by
lowering the backrest to assist cerebral oxygenation if the patient should faint). The LED lights when the
position is reached.
6 • Automatic chair reset (pressing this key returns the backrest to an upright position and moves the chair fully
down). The LED lights when the position is reached.
7 • Raise chair.
8 • Lower chair.
9 • Raise backrest.
10 • Lower backrest.
11 • Indicator lamp: lights to indicate that power is on.
12 • Mechanical memory with LED (OPTIONAL). Press this key to reach a working position set during installation
by the authorized technician. The LED lights when the position is reached.
13-14-15 • Keys for the 3 working positions, with corresponding LEDs.
These keys allow you to save 3 different working positions. Three standard working positions are set during
the final equipment inspection. To change them, proceed as follows: set the chair to the desired positions using
keys
7 , 8 , 9 and 10 . Then hold down the corresponding key (e.g. 13 ) for approximately 5 seconds. A beep
will sound when the position has been saved.
16 • RINSE position: when this button is pressed, the backrest automatically moves to an upright position and the
LED lights. The bowl will automatically flush after a few seconds. You may save a different backrest angle by
following the procedure described above for points
13 - 14 - 15 .
17 • Return to the last position used.
18 • Display for rotating speed of the activated instrument (this function is present only on instruments with rpm
adjustment by foot control).
19 • Assistant call.
☞
WARNING : An automatic movement in progress may be aborted by pressing any of the chair buttons or
acting on the main switch.
19 KEYPAD FUNCTIONS
In order to allow all adjustments and/or replacements, hereunder are listed the
functions controlled by the operator's keyboards.