VITALI FLARES, Техническое руководство, Страница: 14 / 88

T 5
10
B B
Fig. 1 Fig. 2 Fig. 3
Backrest
structure
A
C
A
D
Assembling the backrest housing
Proceed as follows to assemble the backrest housing:
1) Make sure the distance between the hooks " A " and the backrest structure is properly adjusted, to avoid
unnecessary strain when assembling the backrest upholstery, which could lead to breakage of the backrest
guard.
2) If necessary, correct the position of the hooks " A " by loosening the nuts " D ". Tighten the nuts " D " when the
adjustment is complete
3) Tilt the backrest as shown in fig. 1 and fasten it using the hook " A ". Pull downward until it is fully engaged with
the upholstery.
4) Fasten the guard in place using the two tapered screws " B " (fig. 2).
3) Finally, mount the headrest bracket release button " C " (fig. 3).
Perform the same steps in reverse order to remove the backrest housing.