Vishay G4-DT, Техническое руководство, Страница: 84 / 174

Technical Manual
6-2
Display alternatives by normal operation
In the operating display it is possible to view force/web tension information from one or
more function blocks. It is also possible to select which function block that shall be
displayed on the color touch display. With parameter ‘Display modes’ it is possible to
select what combinations of the three operating display modes that can be selected by
the operator. The display modes are single function block display, two function blocks
display and four function blocks display.
A dedicated key on the front panel is used to zero the inputs for selected function
block.
Note that information displayed varies between the operating display modes and that
the information displayed may be different depending on actual settings.
2007-08-02 10:41
FB2, Roller 5
1250
N/m
: 16
Levels
4: 5: 6: 7:
A: 1258 N/m B: 1242 N/m
A: 629 N B: 621 N
------ ------ ------ Levels ------
Sum value
Difference value
Function Block number and name (optional)
Level indicators
Difference graph
Sum graph
Extended info.
Single function block operating display mode.
The Sum and Difference values are Force values as default or Web Tension values if
the ‘Web Tension Mode” is turned on for the function block.
The Sum and Difference graphs are a graphical representation of the corresponding
Sum and Difference values. The scaling of the graphs are made individual for each
function block in the calibration menus.
The Difference value and graph is not shown for a ‘1 Channel’ function block.
The ‘Extended information’ shows some detailed values for the function block. The
exact information displayed depends on current type and configuration of the function
block. The letters (A-D) corresponds to the function block Input A to Input D and the
unit shows if it is a Force or Web Tension value.