Vishay G4-DT, Техническое руководство, Страница: 142 / 174

Technical Manual
8-4
When the correct login credentials are entered the entry screen will be displayed. This
picture will show the Instrument Name (if set) or possible start up errors (serious or
fatal errors). Any errors shown here must normally be corrected from the instrument
and not through remote access. If the start mode of the instrument is ‘Command’ this
will be shown on the entry screen. Note that the start command must be given from the
instrument front panel or by communication, not from the Remote Access. It is possible
to access the menu system even if the instrument is waiting for a manual start
command.
Entry screen
Three buttons are available on the Entry Screen. One is the ‘Menu’ button, which will
give access to the menu system of the instrument. Clicking the ‘Menu’ button is
equivalent to pressing the ‘Info’ key on the instrument front panel.
The second button is ‘Live’. Clicking the ‘Live’ button will display a screen similar to the
normal operation screen shown on the instrument display. It will display force and
possible web tension values, input values and level status in the same way as the
normal operation screen do on the instrument. No bar graphs are displayed. This
screen is intended as a simple operator type of screen. Update rate is about 0.5 Hz
which is lower than the instrument display.
The third button on the Entry Screen is the ‘Logout’ button. Clicking the ‘Logout’ button
will logout the user and display the picture shown below.