Vishay G4-DT, Техническое руководство, Страница: 105 / 174

G4 Multi Channel Force Instrument
7-13
Instrument type
This register holds the type of the instrument. For a G4 Multi Channel Force Instrument
this value is 4002.
Standard program major and minor version
This registers holds the major and minor version for a standard program.
Special program major and minor version
This registers holds the major and minor version for a special program. Both values are
0 for a standard program.
Serial number
This register holds the serial number of the instrument. The value 991000 means
99-1000. This can be used by the master to be sure that an instrument with a specific
serial number is used for a special process.
Command error
This register holds the error code when a command has been sent to the instrument.
A command that gives a 03 or 07 as exception will have an error code with a better
description of the problem in this register. Normally this register should contain ‘00’
which means no error. Error codes 0 to 255 are valid in this register.
Instrument state
This register contains the state of the G4 instrument unit.
Code Description
00 ‘Starting up’ state.
The instrument is starting up after a reset or power on.
01 ‘Wait for start’ state.
The instrument is waiting for a start command to go in process.
03 ‘Normal’ state.
There are no parameter errors in the system.
Note: Force/Web Tension value errors still indicates normal state.
04 ‘Error’ state.
An error has been detected during start up of the instrument.
05 ‘Fatal error’ state.
An error has been detected during start up of the instrument.
It’s not possible to enter any other state from here.