Vishay G4-DT, Техническое руководство, Страница: 70 / 174

Technical Manual
4-30
Range/Alternatives Explanation and
<default value> result of alternatives.
Level 1 Function Block ( - Level 32 Function Block)
1
2
3
4
5
6
7
8
<1> Defines which Function Block that will be supervised by the
level.
1: The level is supervising Function Block number 1.
2: The level is supervising Function Block number 2.
….
8: The level is supervising Function Block number 8.
Note: This parameter is only shown if ‘Level 1 Source’ is not set
to ‘Not in use’.
Level 1 Output ( - Level 32 Output)
Active Above
Active Below
< Active Above > This parameter defines the conditions for control of a possible
used output.
Active above: The used output is activated as the supervised
signal level is above the set level.
Active below: The
used o utput is activated as the supervised
signal level is below the set level.
Note: This parameter is only shown if ‘Level 1 Source’ is not set
to ‘Not in use’.
Level 1 Hystereses ( - Level 32 Hystereses)
Range:
+/-999999
Unit:
Measurement or
Web Tension unit.
< 2 > Defines the hystereses range for the level.
Positive value gives a hystereses range above the switch level,
negative value gives a range below the switch level.
Note: This parameter is only shown if ‘Level 1 Source’ is not set
to ‘Not in use’.
Level 1 Up Delay ( - Level 32 Up Delay)
Range:
0-10.00
Unit: s
< 0.00 > Defines the Delay time for increasing signal. The level will switch
when the supervised value has been above Level 1 value during
the set delay time.
Note: This parameter is only shown if ‘Level 1 Source’ is not set
to ‘Not in use’.
Level 1 Down Delay ( - Level 32 Down Delay)
Range:
0-10.00
Unit: s
< 0.00 > Defines the Delay time for decreasing signal. The level will
switch when the supervised value has been below Level 1 value
during set delay time.
Note: This parameter is only shown if ‘Level 1 Source’ is not set
to ‘Not in use’.