Vishay G4-DT, Техническое руководство, Страница: 149 / 174

G4 Multi Channel Force Instrument
8-11
Function Blocks
Shows information about all used function blocks, one at the time.
Values with the unit ‘--‘ are not used in the current configuration of the function block
and in case of error the five lines in the middle (‘Sum:’ to ‘Outp. 4’) will be replaced by
an error message. A faulty value or a value too large to be displayed (more than 6
digits) is substituted by a number of dashes.
The ‘Type’ and ‘Mode’ fields shows how the function block is configured (‘Hardware
Configuration’ and ‘Calibration’).
The ‘Status’ field represents sixteen discrete data bits and the meaning of each bit can
be found in chapter 7 ‘Communication’ section ‘Modbus protocol’,
‘Function Block X: Status’.
The ‘Input A – D’ is always the force and input signal values to the function block while
the exact meaning of the rest of the values are depending on the current configuration
of the function block. A more detailed explanation of the data content can be found in
chapter 3 ‘Instrument Functionality’. Click buttons ‘Prev’ or ‘Next’ to scroll among the
used Function Blocks.
The values on screen are automatically updated every 2 seconds.
Function Block diagnostics.