Vishay G4-DT, Техническое руководство, Страница: 167 / 174

G4 Multi Channel Force Instrument
10-3
Start-up errors
These error codes can only appear during start-up.
Error
code Explanation
081 Set-up data error
Indicates faulty set-up. Enter set-up mode, perform the necessary editing
and save the new parameter settings or use the “Set Default values”
function (Maintenance menu).
082 Set-up and installed I/O modules do not match
The I/O-modules in the instrument doesn’t correspond to the set-up. Correct
the set-up or change modules.
083 Wrong type of Fieldbus Module
The fieldbus module in the instrument doesn’t correspond to the set-up.
Correct the set-up or change module.
084 No Fieldbus Module
There is no fieldbus module installed in the instrument but the set-up
indicates there should be a fieldbus module. Correct the set-up or install the
desired module.
085 Fieldbus Module Error
There are some kind of error when configuring the fieldbus module. Check
the status LED’s on the module, check that the set-up correspond to the
network configuration, baud rate, addresses etc.
090 Failed to start the real time system
Some error occurred when the real time dll was accessed during start up.
Restart the instrument and if the error persists contact your supplier.
091 Database error
An error occured when the program tried to access the internal parameter
database. To correct the problem first restart the instrument. If the error
persists the database file can be deleted. The instrument will create a new
database with default settings during restart. Upgrading the program (also
reinstalling the present version) will also force a new database with default
settings to be created. If the error still persists contact your supplier.